Imagine communications Selenio 6800 Installation And Operation Manual page 37

Chapter 2: Installation
Note
You must delete unwanted files
in the Add upgrade files for
transfer to device: field before
transferring the files. Otherwise,
the upgrading procedure will
fail.
Note
Some 6800+ modules will
reboot automatically. In these
cases, the Reboot button will be
grayed out.
24
10. Double-click the device icon.
The Configuration... box opens. On the File Transfer tab, the
/frame/slot (where x is the slot number) directory appears in the
Select the device directory to transfer to: field.
11. Click Add.
12. In the Add Upgrade Files box, browse to the module's upgrade
package, and then click OK.
13. Choose the file you wish to upgrade, and then click OK.
14. Click Perform Transfer, and then click Yes.
This may take several minutes.
15. Wait for the message File transfer to device succeeded in the
status bar.
16. Click Reboot Device, and then click Yes.
After the module has rebooted, a message box advises you to wait
until the device has rebooted.
17. Wait 30 seconds.
Your upgrade procedure is complete.
HMX6800+BC8 Installation and Operation Manual