Correcting A Failed Upgrading Procedure - Imagine communications Selenio 6800 Installation And Operation Manual

Correcting a Failed Upgrading Procedure

HMX6800+BC8 Installation and Operation Manual
4. On the Device tab of the Navigation Properties box, enter the IP
address of the frame that holds the module. (See
Enter frame IP number here
Figure 2-4. Navigation Properties Box
Caution
If you make changes in the last field (located above and to
the right of the Set Default button), you may lose your
connection to the module. If this happens, you will need to
rediscover the module.
5. In the third field, enter the slot number of the module, and then
close the window.
You can now continue upgrading your device's firmware as in
"Upgrading the Firmware Using the Discovery Method" on page
starting with step 3.
Firmware upgrades may fail in the event of network interruptions,
power failures, or if files were sent to the wrong 6800+ module.
Chapter 2: Installation
Figure 2-4.)
Do not make changes
in this field
18,
21