Omron NT20S Operation Manual page 237

Terminal Commands
Normal Display
Format
Description
Set Inverse Display
Format
Description
Reference: The Set Inverse Display Command is cancelled by the End Inverse Display Com-
End Inverse Display
Format
Description
Reference: The inverse display attribute is set with the Set Inverse Display Command.
218
Cancels all display attribute settings(inverse, flashing, flashing inverse) for char-
acters and marks so that all characters are displayed as "normal" characters (not
inverse or flashing).
Sets the display attribute to inverse so that all characters and marks sent subse-
quently are highlighted. Other attributes remain unchanged.
mand or the Normal Display Command.
The setting with this command remains valid until the screen display is switched or
another display attribute setting is made. The default display attributes are set to a
normal display when a screen is initially displayed.
Use this command with the Set Flashing Display Command (refer 6-6 Set Flashing
Display) to produce a flashing inverse display.
Clears the inverse display attribute so that all characters and marks sent subse-
quently are not highlighted. Other attributes remain unchanged.
The setting with this command remains valid until the screen display is switched or
another display attribute setting is made. The default display attributes are set to a
normal display when a screen is initially displayed.
[ESC] !
1B 21
[ESC] "
1B 22
[ESC] #
1B 23
Section 6-6