Omron NT20S Operation Manual page 13

Related Manuals and Their Contents:
[Operating the programmable terminal and communicating with the host]
[Creating and transferring screen data]
[For Connection to Other Makers' PCs]
xii
The related manuals are indicated below.
The j symbol at the end of the manual number is the revision history symbol.
S NT20S Programmable Terminal Operation Manual (V020-E1-j)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This operation manual is the manual for the NT20S itself.
The NT20S is a unit which integrates a programmable terminal body and host
interface unit. This operation manual describes the functions and handling of
both the programmable terminal body and the host interface function.
S NT Series Support Tool Ver.2j Operation Manual (V028-E1-j)
The screens displayed on the NT20S are created with the support tool and trans-
ferred to the NT20S. This manual describes how to create and transfer screen
data.
S PC Connection V042-E1-j
NT600S-ST121(B)-EV3 and NT600S-ST211(B)-EV3 can be connected to Mit-
subishi A series PCs. This manual describes how to make the connection and
how to make settings when connecting the PT to a Mitsubishi A series PC.
In order to use the PT while connected to a PC made by a manufacturer other
than OMRON, the Ver. 2.3 support tool must be used.
This manual