Omron NT20S Operation Manual page 225

Memory Tables
Description
Caution:
4-digit Write Numeral Memory Table
Format
Description
Caution:
8-digit Write Numeral Memory Table
Format
Description
206
Writes the character-string data to the character-string memory table.
The character-string data can contain a mixture of normal alphanumeric charac-
ters and marks. When determining the character string length, count each mark as
two normal characters.
If the actual character string is longer than the specified character string length, the
specified number of characters is written and the remainder are discarded.
A timeout error message is displayed if the actual character string is shorter than
the specified character string length.
[ESC] C
1B 43
d d d : Numeral memory table address of write destination (3-digit hexadecimal)
1 2 3
000 to 07F
H
n n n n : Number data (4-digit BCD or 4-digit hexadecimal)
1 2 3 4
S Writes 4-digit number data (decimal or hexadecimal) to the specified numeral
memory table.
S If a 4-digit number data is written while an 8-digit numeral is displayed, the lower
4 digits are updated.
This command cannot be used to write negative numbers. Use the 8-digit Write
Command (refer to 6-3 8-digit Write Numeral Memory Table).
[ESC] D d
1B 44 * *
n n
6 7
* * * *
d d d : Numeral memory table address of write destination (3-digit hexadeci-
1 2 3
mal) 000 to 07F
n n n n n n n n : Number data (8-digit BCD or 8-digit hexadecimal)
1 2 3 4 5 6 7 8
S Writes the 8-digit number data (decimal or hexadecimal) to the specified numer-
al memory table
S To write a negative numeral (decimal), specify "F(46
7-digit numeral is written.)
d d d
1 2 3
* * * * * *
(0 to 127)
d d n
1 2 3 1
* * * * * *
n
8
* *
(0 to 127)
H
Section 6-3
n n n
1 2 3
* * * * * * * *
n n n
2 3 4
* * * * * *
)" for "n " (in this case, a
H 1
n
4
n
5
* *