Omron NT20S Operation Manual page 143

Screen Display
Switching the Continuous Screens by Using the Touch Switches
124
[Example continuous screens]
Continuous
screen (1)
touch switch
Continuous
screen (2)
touch switch
Continuous
screen (3)
S Parent screen: #10
S Child screens: #20, #15, and #5
When screen #10 (continuous screen) is designated, screen #20 which is page 1
of the continuous screens will be displayed. Screen #15 or #5 can be displayed
by using the touch switches. Since screen #10 has been set for the continuous
screens, that screen cannot be displayed as an individual screen.
Continuous screens can be switched by using the
have the system key functions.
When creating the screen, create touch switches
key functions are allocated. (Refer to "System key functions" (page 139).)
Production Status
Line A: Normal
Line B: Normal
1/3
Screen #20
touch switch
2/3
Screen #15
touch switch
3/3
Screen #5
1/3
Section 4-3
and touch switches which
and to which the system