Omron NT20S Operation Manual page 127

System Maintenance
[NT20S-ST121-EV3]
[ PT SETTING ]
PT Control Area
PT Notify Area
Comm. Type
Baud Rate
EXIT
(NT Link (1:N))
[ PT SETTING ]
PT Control Area
PT Notify Area
Comm. Type
Unit No.
EXIT
[NT20S-ST122-V1 (C200H direct communication)]
[ PT SETTING ]
PT Control Area
PT Notify Area
Comm. Type
Unit No.
EXIT

If no unit number is set at the PC, "0" will be
displayed.
108
(Host link)
DM0000
DM0010
Host Link
9600bps
DM0000
DM0010
NT Link 1:N
7
DM0100
DM0200
C200H
0
S The current PT settings will be displayed.
S Pressing the "EXIT" touch switch will exit the PT settings display, and the NT20S
will return to the RUN Mode.
(NT Link (1:1))
[ PT SETTING ]
PT Control Area
PT Notify Area
Comm. Type
EXIT
[NT20S-ST128 (RS-232C)]
[ PT SETTING ]
Data Bits
Stop Bits
Parity Check
Flow Control
Baud Rate
EXIT
Section 3-9
DM0000
DM0010
NT Link
8bits
1bit
Even
RS/CS
19200bps