Omron NT20S Operation Manual page 147

Memory Tables
Numerals Which can be Displayed
Reference: Zero suppress setting
128
The power of expression of the screen can be increased by giving various attrib-
utes such as the enlarged or reverse display to the numerals of the numeral
memory table.
The numeral attributes can be set in the edit screen when creating the screen data
by using the support tool.
S Digits of the whole numbers: 1 to 8 digits
S Digits of the decimal fraction: 0 to 7 digits
S Character sizes:
S Enlarged display:
S Display attribute:
S Sign display setting
S Decimal/hexadecimal display setting
S Zero suppress setting
To display one numeral memory table on several different screens simultaneously,
the display attributes on such screens must be the same. If there is discrepancies
among the display attributes, the numeral table may not be displayed correctly.
The numeral data are displayed in designated display areas as right-aligned. If the
number of digits of a numeral data is smaller than that of the display area, number
"0"s will be displayed at the vacant digits. These "0"s will not be displayed if the
zero suppress setting is made for "Yes".
Half, normal
Double width, double height, x4, x9, x16
The characters enlarged to the x4 scale or larg-
er are displayed with the outline automatically
smoothed. This function is called "smoothing".
Normal, reverse, flashing, reverse and flashing
Section 4-4