Table of Contents
Advertisement
Quick Links
LIMITED ONE YEAR WARRANTY
SATISFACTION GUARANTEED
#9101 LIGHT RANGER MUTT
Innovative Products of America
Incorporated has established a Limited One Year
®
Warranty Policy for the Light Ranger MUTT
i.e., clips, etc.
One Year Limited Warranty/Return or Replace Policy: The product is covered for
one year from the date of the original user's purchase under the stipulations of the Stan-
dard Warranty.
The product is warranted to be free from defects in workmanship or material. If there
is a problem due to workmanship or material defect, Innovative Products of America
Incorporated will repair or replace the product within 24 working hours after it is re-
ceived by the IPA
Repair Service Center. If it is determined that the product has been
®
tampered with or altered in any way, the warranty is void and all claims against the prod-
uct will not be honored. The Warranty Repair/Return procedures require that the proof of
purchase must be established (either by warranty card from the seller or by point of pur-
chase receipt/invoice) and the manufacturer makes every attempt to return ship the prod-
uct, prepaid freight, within three business days from the receipt of the returned product.
If it has been determined that the tool has been damaged due to misuse, Innovative
Products of America
Incorporated will repair the tool at a cost we deem reasonable and
®
these charges will be the responsibility of the user. We truly want you to be happy with our
products, so if you have any questions, call us toll-free at 888-786-7899
ORIGINAL EQUIPMENT MANUFACTURER (OEM) USA
Innovative Products of America
www.ipatools.com
845-679-4500 / 888-786-7899
234 Tinker Street Woodstock, NY 12498
© 2016 Innovative Products of America
Incorporated. All rights reserved. This material may not be reproduced, displayed, modi-
®
fi ed or distributed without the express prior written permission of the copyright holder. For permission, contact info@ipatools.com.
12
Mobile Universal Trailer Tester
®
#9101, not including any wearable parts,
®
.
®
Inc.
®
9101-MANUAL-IPA-2016-VC-02-02
®
Tests 7 Spade, 6 Round and 4/5 Pin Connections.
Uses Internal 12 Volt Motorcycle Battery.
888-786-7899 • 234 Tinker Street, Woodstock, NY 12498 • www.ipatools.com
© 2016 Innovative Products of America
or distributed without the express prior written permission of the copyright holder. For permission, contact info@ipatools.com.
Mobile Universal Trailer Tester
LIGHT RANGER MUTT
#9101
OPERATOR'S MANUAL
(Battery Not Included)
Innovative Products of America
Incorporated
®
Incorporated. All rights reserved. This material may not be reproduced, displayed, modifi ed
®
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for iPA 9101
Summary of Contents for iPA 9101
- Page 1 Innovative Products of America Incorporated has established a Limited One Year ® Warranty Policy for the Light Ranger MUTT #9101, not including any wearable parts, ® i.e., clips, etc. One Year Limited Warranty/Return or Replace Policy: The product is covered for one year from the date of the original user’s purchase under the stipulations of the Stan-...
-
Page 2: Important Safety Instructions
LETTER FROM THE PRESIDENT OF IPA ® ® Fig. 1 - Parts Diagram My name is Peter Vinci and I am the president of IPA . I would like to fi rst thank you for ® your interest in IPA ’s product line and share my commitment to you, our products and... -
Page 3: Typical Trailer Wiring
1. Plug the 3-way adapter into the 7-way socket on the Ranger MUTT THE FOLLOWING SAFETY ALERT SYMBOLS ARE ® 2. Be sure to push fi rmly until the key is down far enough for the fl ap to lock in behind it. USED IN THIS MANUAL. -
Page 4: Acid Burns
ACID BURNS Wrong circuit is powered on trailer. The trailer is not wired to standard specifi cations. If possible, rewire trailer • Battery acid is highly corrosive sulfuric acid. connector to match the Ranger MUTT ® • Wear safety goggles, both user and bystanders. diagrams. -
Page 5: Troubleshooting
SHORT CIRCUIT AND OVERLOAD TESTING SPECIFICATIONS Short Circuit: When a positive power source (12V +) is directly connected to or touching • Input: 12V DC Battery (Use Battery Compartment) the ground (-), wire insulation can wear through due to vibration; exposed copper wire can •... -
Page 6: Functional Descriptions
NOTE: Use the supplied battery charger or charger input no greater than 10 amps to OPERATING INSTRUCTIONS fully charge the internal battery of the tester. It may take up to 12 hours to charge a 7-WAY FLAT/SPADE PIN TESTING PROCEDURE fully drained battery.
Need help?
Do you have a question about the 9101 and is the answer not in the manual?
Questions and answers