Lanner FW-8759 User Manual page 30

Serial ATA Port 0/1/2
Use this menu to configure specific SATA Port for all ports
on the system.
Option
Port 0 Enable or disable the specific port
Hot Plug The AHCI of SATA provides hot plug capability
to allow drives to be added or removed with the
PC running.
External Called external SATA or eSATA, you can now
SATA utilize shielded cable lengths up to 2 meters
outside the PC to transform SATA to be an
external storage. enable or disable this feature.
SATA Device Select the SATA type from either Hard Disk Drive
type or Solid State Drive
Spin Up Spin-up is a simple mechanism by which the
Device storage subsystem controller can sequence
hard disk drive initialization and spin-up.set to
control whether each specific drive will spin up.
USB Configuration Setting
You can use this screen to select options for the USB
Configuration. Use the up and down <Arrow> keys to
select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option. The settings are
described on the following pages.
Legacy USB Support
This option enable or disable the support for USB
devices on legacy operating systems (OS), e.g., Windows
ME/98/NT, and MS-DOS. Normally if this option is not
enabled, any attached USB mouse or USB keyboard will
not become available until a USB compatible operating
system is fully booted with all USB drivers loaded. When
this option is enabled, any attached USB mouse or USB
keyboard can be used on the system even when there is
no USB drivers loaded on it.
Description