Lanner FW-8759 User Manual page 29

SATA Configuration Settings
While entering Setup, the BIOS automatically detects
the presence of SATA devices. The SATA Port items
show "Empty" if no SATA device is installed to the
corresponding SATA port.
SATA Controllers
Item
Enable or Set this value to enable or disable SATA
Disable SATA controllers
Controller(s)
SATA Mode Selection
The system supports advanced SATA features such as
software RAID.
Item
IDE Mode Set to IDE mode when your want to use the
Serial-ATA hard disk drives as Parallel ATA
physical storage devices.
AHCI Mode Set to AHCI mode when you want the SATA
hard disk drives to use the AHCI (Advanced
Host Controller Interface). The AHCI allows
the onboard storage driver to enable
advanced SATA features that increases
storage performance or workloads where
multiple simultaneous read/write requests are
outstanding, most often occurring in server-
type applications (native command queuing). It
also facilitates hot swapping.
RAID Set to the RAID mode when you want to create
a RAID configuration from the SATA Hard disk
drives. Thie chipset supports software RAID
using the Intel® Matrix Storage Manager
software. For more information, visit
http://www.intel.com/design/chipsets/
matrixstorage_sb.htm#benefit
Selection
Selection
by