The Screen Menu; Selecting A Viewing Size - RCA Scenium PHD50400 User Manual

Thomson/rca plasma monitor user's guide
Hide thumbs Also See for Scenium PHD50400:
Table of Contents

Advertisement

The Menu System

The Screen Menu

The SCREEN menu allows you to set the monitor to automatically select the correct mode for viewing a particular movie and to change
the positions of on-screen menus.

Selecting a Viewing Size

When viewing with a component other than your HD receiver*, you can set the screen mode to one of four screen sizes to suit the type
of input you are watching. Select the screen mode with the CINEMA button on the remote. The screen sizes are as follows:
Fill
Normal
Full
Stadium
24
FILL expands in both vertical and horizontal directions while the correct proportions are
maintained. The picture is not distorted, just closer.
NORMAL displays a picture with a 4:3 aspect ratio (standard video). Because this mode
fills the screen vertically, but not horizontally, black bars will appear on the right and left
sides of the picture.
Note: If viewing with a 4:3 aspect ratio for long periods of time, set side gray level at 3 or 4.
FULL expands the picture in the horizontal direction only. This option corrects the aspect
ratio of images that have been compressed or horizontally "squeezed."
STADIUM expands horizontally – the center of the picture is almost normal while the
edges are considerably expanded. This mode is intended for watching video with a 4:3
aspect ratio on a wide screen.
Note: In Stadium mode, only the V-position and H-position are displayed. You can't change the
height and width.
Chapter 2

Advertisement

Table of Contents
loading

Table of Contents