Sleep Timer; Setting The Sleep Timer; Cancelling The Sleep Timer - RCA Scenium PHD50400 User Manual

Sleep Timer

The sleep timer is a feature that allows you to set the monitor to turn off after a prescribed amount of
time. It can be set to turn the power off after 30, 60, 90 or 120 minutes.

Setting the Sleep Timer

1. Press the SLEEP button on the remote to turn on the timer. The default is 30 minutes.
2. Press the SLEEP button again to move to the next time increment. Press the SLEEP button until you get
to the desired time.
3. The timer starts when the Sleep display disappears from the screen.
To check the Remaining Time:
1. Once the sleep timer has been set and the menu has turned off, press the SLEEP button once.
2. The remaining time is displayed, then disappears after a few seconds.
3. When five minutes remain, the remaining time appears until it reaches zero.

Cancelling the Sleep Timer

1. Press the SLEEP button twice in a row.
2. The sleep timer is canceled.
NOTE: After the power is turned off with the sleep timer, a slight current is still supplied to the monitor. If you do not plan to
use the system for a long period of time, turn the power off with the remote or on the unit.
Chapter 2
The Menu System
35