Table of Contents
Advertisement
The Menu System
Setting a Computer Image to the Correct RGB Select Mode
The RGB SELECT function allows you to select the correct viewing mode for the type of computer image you are displaying.
The RGB SELECT function has six modes:
AUTO – Automatically selects the most suitable mode for displaying the input signal.
STILL – Use this mode to display VESA standard signals (still image from a computer).
MOTION – Use this mode for moving images from a computer. Converts the signal to RGB signal for best viewing.
WIDE1– Prevents horizontal compression when the input signal is 852 dot X 480 line signal with a horizontal frequency of
31.7kHz.
WIDE2 – Prevents horizontal compression when the input signal is 848 dot X 480 line signal with a horizontal frequency of
31.0kHz.
DTV – This mode is primarily used to optimize picture quality if you are using a generic-brand DTV receiver which outputs signal
at 480P (progressive scan) lines.
To change the RGB SELECT mode:
OPTIONS
AUDIO INPUT
AUDIO1
: VIDEO1
AUDIO2
: CMPNT1
AUDIO3
: RGB1
BNC SELECT
: RGB2
RGB SELECT
:
AUTO
HD SELECT
: 1080A
PICTURE SIZE
: ON
ADJ.
SEL.
This is the OPTIONS menu with the RGB SELECT option
highlighted.
OPTIONS
AUDIO INPUT
AUDIO1
: VIDEO1
AUDIO2
: CMPNT1
AUDIO3
: RGB1
BNC SELECT
: RGB2
RGB SELECT
: RGB
HD SELECT
:
1080A
PICTURE SIZE
ON
ADJ.
SEL.
This is the OPTIONS menu with the HD SELECT option
highlighted.
32
1. From the main menu, highlight and select the OPTIONS menu. The OPTIONS menu
is displayed.
2. Highlight the RGB SELECT option.
3. Use the
4. When the desired mode is selected, press the
menu items. You can continue making adjustments within the OPTIONS menu,
press GO BACK to return to the previous menu or press CLEAR to exit the menu
RETURN
system.
Setting the Monitor to the Correct HD Receiver Mode
The HD SELECT function allows you to select the correct mode for the monitor to
work with your HD receiver. The default setting is 1080A. This is the correct setting
for all RCA and PROSCAN HD receivers. If you have another brand of HD receiver,
your picture may appear broken or off-center. If so, you need to switch HD SELECT
modes.
1080A – Use this option for RCA or PROSCAN HD receivers.
1080B – Use this option if you have any other brand of HD receiver.
To change the receiver mode:
1. From the main menu, highlight and select OPTIONS. The OPTIONS menu is
displayed.
RETURN
2. Highlight the HD SELECT option.
3. Use the
4. When the desired number is selected, press the
OPTIONS menu items. You can continue making adjustments within the OPTIONS
menu, press GO BACK to return to the previous menu or press MENU or CLEAR to
exit the menu system.
button to scroll through the choices. The settings switch as follows:
button to select the desired mode (1080 A or 1080 B).
button to return to the OPTIONS
button to return to the
Chapter 2
Advertisement
Table of Contents
