DataCard CD800 Product Manual page 14

Q: Is there an option for an extended input hopper? And is it field upgradeable?
A: Yes, there is a 200 input hopper option available and it is field upgradeable.
Q. How many cards can the output hopper hold?
A. 100.
Q. What communication interfaces will the CD800 CLM printer support?
A. USB and Ethernet connectivity are supported.
Q. What driver does the CD800 CLM printer use?
A. The CD800 printer and Commercial Lamination Module uses driver version 5.0.
Q. Is there a reject bin in the laminator?
A. Yes – it holds up to 10 cards.
Q. How does the card debower work and can it be adjusted?
A. The card debower holds the card in a position to reduce the bow in the card. You can turn the
debower off via settings in the printer driver.
Q. Is the hardware lock option field upgradeable?
A. No, this must be purchased at time of printer order.
Q. Is the second laminator option field upgradeable?
A. Yes, this can be purchased later, and can be upgraded in the field by a Datacard authorized
service representative or a trained Datacard Channel Partner.
Q: Is the tactile impression field upgradeable?
A: Yes, this can be purchased later, and can be upgraded in the field by a Datacard authorized
service representative or a trained Datacard Channel Partner.
Q: Can you put a CD800 multi-hopper on top of a CLM?
A: It is not advised, so please contact your sales manager for further information if you have a
specific request.
Q: Can a CD800 Simplex printer be used with a CLM?
A: No, it requires a duplex system.
Q: Does a user need access to the internet or a network in order to use the Printer
Manager?
A: Yes, you need to have a browser connection.
Q: What operating systems support the CD800 CLM printer?
A: The CD800 CLM printer is supported by the following Microsoft operating systems: Windows 8
(32/64 bit), Windows 7 (32/64 bit), Windows XP with SP3 (32 bit), Windows 2003 R2 Server (32
bit), Windows 2008 R2 Server (64 bit), Windows 2012 Server (64 bit).
Q: Where is the diagnostic program located?
A: The diagnostic tools are now built into the CD800 printer and are accessible through the
browser-based Print Manager.
Page 14 of 19
Datacard Group Confidential