11.2 Handwheel Locking Device Option; Transport, Storage, Disposal - Burkert 3233 Operating Instructions Manual

11.2 handwheel locking device option
The handwheel locking device option (from actuator size DN15 to
DN50) prevents unintentional or unauthorized operation of the valve.
Handwheel can be locked in 12 detent positions per revolution (30°
each).
Lock
Pin
Fig. 13: Handwheel with lock
26
→
Using a key, press the pin
into the lock and turn all the
way to the left.
→
Remove key.
Valve is locked.
english
Type 3232, 3233, 3233 K, 3234,

Transport, Storage, Disposal

12 TranspOrT, sTOrage,
DispOsal
note!
transport damages.
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
incorrect storage may damage the device.
• Store the device in a dry and dust-free location.
• Storage temperature: -40...+55 °C.
damage to the environment caused by device components
contaminated with media.
• Dispose of the device and packaging in an environmentally friendly
manner.
• Observe applicable regulations on disposal and the environment.
note:
Observe national waste disposal regulations.
3235, 3239