5.4.2
MP-124 Rev. E
MP-124 Rev. E provides serial interface through the RJ-45 port located on the rear panel:
Cable adapter: straight-through RJ-45 to DB-9 cable (not supplied)
Connector pinouts:
Table 5-2: RJ-45 to DB-9 Serial Cable Connector Pinouts
To connect MP-124 Rev. E to a computer for serial communication:
1.
Connect the RJ-45 connector, at one end of the cable adapter, to the device's RJ-45
port labeled ETHERENT, located on the rear panel.
Figure 5-28: Connecting MP-124 Rev. E for Serial Communication
Hardware Installation Manual
Figure 5-27: RJ-45 to DB-9 Serial Cable Adapter
RJ-45
1
2
3
4
5
6
7
8
40
MP-124
DB-9 Female
8
6
2
5
5
3
4
7
Document #: LTRT-59847