Hardware Installation Manual
3.3
Rear Panel
The device's rear panel provides the port interfaces.
3.3.1
MP-124 Rev. D
The MP-124 Rev. D rear panel is shown below (AC and DC powered models) and
described in the subsequent table.
AC-powered model:
Figure 3-2: Rear Panel of AC-Powered MP-124 Rev. D Model
DC-powered model:
Figure 3-3: Rear Panel of DC-Powered MP-124 Rev. D Model
Item #
1
2
3
4
5
MediaPack Analog Gateways
Table 3-3: MP-124 Rev. D Rear-Panel Description
Label
Protective earthing screw (mandatory for all
installations). Accepts a 6-32 UNC screw.
AC power supply socket.
100-240 V~
Note: Applicable only to the AC-powered model.
50 - 60Hz 0.8A
DC inlet for a DC terminal block.
48V 1.3A
Note: Applicable only to the DC-powered model.
ANALOG FXS
50-pin Telco connector, providing up to 24 analog lines.
LINES 1–24
DB-9-pin male port for serial (RS-232) communication.
RS-232
RJ-45 port for 10/100Base-TX Ethernet interface.
ETHERNET
Component Description
15
3. Physical Description
MP-124