Table of Contents
Advertisement
82
2. Instrument cluster
*
1
*
1, 4
*
1
*
1
: These lights turn on when the engine switch is turned to the "ON" position
(vehicles without a smart key system) or IGNITION ON mode (vehicles
with a smart key system) to indicate that a system check is being per-
formed. They will turn off after the engine is started, or after a few seconds.
There may be a malfunction in a system if a light does not come on, or if
the lights do not turn off. Have the vehicle inspected by your Toyota dealer.
*
2
: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the engine switch is turned to the "ON" position (vehicles without
a smart key system) or IGNITION ON mode (vehicles with a smart key
system), the BSM function is enabled on the
information display.
• When the BSM function is enabled on the
information display, the engine switch is turned to the "ON" position
(vehicles without a smart key system) or IGNITION ON mode (vehicles
with a smart key system).
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
*
3
: The light flashes to indicate that the system is operating.
*
4
: The light turns on when the system is off.
C-HR_OM_USA_OM10526U
Indicators
VSC off indicator
PCS warning light (if equipped)
"AIR BAG ON/OFF" indicator (on the center
panel) (if equipped)
Pages
P. 280
P. 215
P. 46
screen of the multi-
screen of the multi-
Advertisement
Table of Contents
