Toyota C-HR 2018 Owner's Manual page 255

Turning the BSM function/RCTA function on/off
1 Press "<" or ">" of the meter control switches, select
2
Press "∧" or "∨" of the meter control switches, select
3 Press "∧" or "∨" of the meter control switches, select
■
The outside rear view mirror indicators visibility
When under strong sunlight, the outside rear view mirror indicator may be dif-
ficult to see.
■
Hearing the RCTA buzzer
The RCTA buzzer may be difficult to hear over loud noises, such as if the
audio system volume is high.
■
When "Blind Spot Monitor Unavailable." is shown on the multi-informa-
tion display
Water, snow mud, etc., may be built up in the vicinity of the sensor area of
bumper (→P. 257).
Removing the water, snow, mud, etc., from the vicinity of the sensor area
bumper should return it to normal.
Also, the sensor may not function normally when used in extremely hot or
cold weather.
■
When "Blind Spot Monitor System Malfunction Visit Your Dealer." is
shown on the multi-information display
There may be a sensor malfunction or misaligned. Have the vehicle
inspected by your Toyota dealer.
C-HR_OM_USA_OM10526U
4-5. Using the driving support systems
.
255
.
.
or
4