Toyota C-HR 2018 Owner's Manual page 166

166
4-2. Driving procedures
Stopping the engine
1 Stop the vehicle.
2 Set the parking brake (→P. 178), and shift the shift lever to P.
If the parking brake is in automatic mode, the parking brake is set automat-
ically when shifting the shift lever to P. (→P. 177)
3 Press the engine switch.
4
Release the brake pedal and check that "ACCESSORY" on the
multi-information display is off.
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
*
Off
The emergency flashers can be
used.
The multi-information display will
not be displayed.
ACCESSORY mode
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
IGNITION ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed on the multi-information display.
*
: If the shift lever is in a position other than P when turning off the engine,
the engine switch will be turned to ACCESSORY mode, not to off.
C-HR_OM_USA_OM10526U
ACCESSORY
IGNITION ON