Changing settings of the pre-collision system
■
Enabling/disabling the pre-collision system
The pre-collision system can be enabled/disabled on the
multi-information display as following:
The system is automatically enabled each time the engine switch is
turned to the "ON" position (vehicles without a smart key system) or
turned to IGNITION ON mode (vehicles with a smart key system).
1
Press "<" or ">" of meter control switches and select
2
Press "∧" or "∨" of meter control switches and select
and press
3
Press "∧" or "∨" of meter control switches and select
and press
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
C-HR_OM_USA_OM10526U
4-5. Using the driving support systems
.
to select the desired setting (on/off).
215
.
,
,
4