Table of Contents
Advertisement
■
How to initialize the tire pressure warning system
1
Park the vehicle in a safe place and turn the engine switch to the
"LOCK" position (vehicles without a smart key system) or off
(vehicles with a smart key system).
Initialization cannot be performed while the vehicle is moving.
2
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. (→P. 456)
Make sure to adjust the tire pressure to the specified cold tire infla-
tion pressure level. The tire pressure warning system will operate
based on this pressure level.
3
Turn the engine switch to the "ON" position (vehicles without a
smart key system) or IGNITION ON mode (vehicles with a smart
key system).
4
Press "<" or ">" of the meter control switch to select
(→P. 90)
5
Press "∧" or "∨" of the meter control switch to select the "Vehicle
Settings" and then press
6
Press "∧" or "∨" of the meter
control
switch
and hold
7
When initialization completes, a message is displayed on the
multi-information display and the tire pressure warning light will
blink 3 times.
6-3. Do-it-yourself maintenance
to
select
and then press
.
to display the menu.
355
.
6
Advertisement
Table of Contents
