Toyota C-HR 2018 Owner's Manual page 375

Hide thumbs Also See for C-HR 2018:
Table of Contents

Advertisement

3
Remove the depleted battery.
When removing the cover, if the
battery cannot be seen due to the
electronic key module attaching to
the upper cover, remove the elec-
tronic key module from the cover
so that the battery is visible as
shown in the illustration.
Use an appropriate sized flathead
screwdriver when removing the
battery.
Insert a new battery with the "+" terminal facing up.
4
When installing, reverse the steps listed.
Use a CR1620 (vehicles without a smart key system) or CR2032 (vehicles
with a smart key system) lithium battery
Batteries can be purchased at your Toyota dealer, local electrical appliance
shops or camera stores.
Replace only with the same or equivalent type recommended by the manu-
facturer.
Dispose of used batteries according to local laws.
If the key battery is depleted
The following symptoms may occur:
The smart key system (if equipped) and wireless remote control will not
function properly.
The operational range will be reduced.
6-3. Do-it-yourself maintenance
375
6

Advertisement

Table of Contents
loading

Table of Contents