Toyota C-HR 2018 Owner's Manual page 440

440
7-2. Steps to take in an emergency
3 Connect the jumper cables according to the following procedure:
Connect a positive jumper cable clamp to the positive (+) battery
terminal on your vehicle.
Connect the clamp on the other end of the positive cable to the
positive (+) battery terminal on the second vehicle.
Connect a negative cable clamp to the negative (-) battery termi-
nal on the second vehicle.
Connect the clamp at the other end of the negative cable to a
solid, stationary, unpainted metallic point away from the battery
and any moving parts, as shown in the illustration.
4 Start the engine of the second vehicle. Increase the engine speed
slightly and maintain at that level for approximately 5 minutes to
recharge the battery of your vehicle.
5
Vehicles with a smart key system: Open and close any of the doors
of your vehicle with the engine switch off.
C-HR_OM_USA_OM10526U
4
3
2