Sanyo MCO-18AIC Service Manual page 58

CAUTIONS FOR USAGE
The cautions below are applicable when an optional UV system kit MCO-18UVS is installed.
1. Always use humidifying pan and pan cover
The humidifying pan and pan cover prevent the UV light from escaping. Make sure they are installed
even if you do not need humidity.
2. Notice of recommended replacement of UV lamp
This unit is provided with a function to notify the recommendation of UV lamp replacement when the
accumulated ON time of UV lamp is over about 1,000 hours. The blink of the UV indicator on the control
panel recommends the replacement of UV lamp. For the replacement, contact Sanyo sales
representative or agent.
E18 will be displayed on the temperature indicator when the UV lamp is burned out. Contact Sanyo
sales representative or agent for the replacement.
3. Location of UV lamp
The UV lamp is located in the duct. Take care not to damage the lamp at the time of installation/removal
of attachments or humidifying pan.
55
9