Table of Contents
Advertisement
2.8
Installing a Pentium III Processor
Follow these steps to install a Pentium III processor into the socket on the CPU
board.
The system settings are configured at the
factory for the correct CPU frequency/
Memory DIMM combination. If you upgrade
the CPU frequency to 300, 350, 400, or 450
MHz, the memory controller requires PC-100
DRAM DIMMs. Your system will not work
properly if you use standard DIMMs with the
higher speed CPUs. All of the installed
DIMMs must have the same capabilities.
Chapter 2 – System Board 2-15
Advertisement
Table of Contents
