Table of Contents
Advertisement
Host Adapter SCSI Termination
This option allows you to configure host controller SCSI termination.
following figure shows the choices available if you have an AHA-3950U2B.
Configuration
SCSI Bus Interface Definitions
Additional Options
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 4-6 Host Adapter SCSI Termination Selection for AHA-3950U2B
Use the cursor (
Adaptec AHA-3950U2B
AHA-3950U2B at Bus:Device 01:06h
Host Adapter SCSI ID................................ 7
SCSI Parity Checking ................................ Enabled
Host Adapter SCSI Termination................. Automatic
Boot Device Options .................................. Press <Enter>
SCSI Device Configuration ........................ Press <Enter>
Advanced Configuration Options ............... Press <Enter>
<F6> - Reset to Host Adapter Defaults
) and Enter keys to make your selection.
SCSISelect (TM)
Automatic
* Enabled
Disabled
Chapter 4 – SCSISelect Configuration Utility 4-9
Utility
=default)
*
The
Advertisement
Table of Contents
