Table of Contents
Advertisement
3.6.6
System Boot Drive
This parameter allows you to specify the system search sequence. The selections
are:
Drive A then C: The system checks drive A first. If there is a diskette in the
drive, the system boots from drive A. Otherwise, it boots from drive C:.
Drive C then A: The system checks drive C first. If there is a hard disk
(drive C) installed, the system boots from drive C. Otherwise, it boots from
drive A.
C: The system always boots from drive C.
A: The system always boots from drive A.
3.6.7
Boot From IDE CD-ROM
When set to Enabled, the system checks for a bootable CD in the IDE CD-ROM
drive. If a CD is present, the system boots from the CD-ROM; otherwise, it boots
from the drive specified in the System Boot Drive parameter.
Disabled, the system boots from the drive specified in the System Boot Drive
parameter. The default setting is Enabled.
3-20
Altos 1100E Series User's Guide
When set to
Advertisement
Table of Contents
