Table of Contents
Advertisement
Configuration
SCSI Bus Interface Definitions
Additional Options
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit (
Figure 4-4 Host Adapter SCSI ID Selection Screen for AHA-3950U2B
Each SCSI device on the SCSI bus, including the SCSI controller, must be set to a
unique SCSI ID. The SCSI ID serves two purposes: it uniquely identifies each SCSI
device on the bus, and it determines the device's priority on the bus during the
Arbitration phase. The Arbitration phase determines which device controls the bus
when two or more devices request use of it.
Use the cursor (
Press Esc at any time to return to the previous menu.
Adaptec AHA-3950U2B
AHA-3950U2B at Bus:Device 01:06h
Host Adapter SCSI ID................................ 7
SCSI Parity Checking ................................ Enabled
Host Adapter SCSI Termination................. Automatic
Boot Device Options .................................. Press <Enter>
SCSI Device Configuration ........................ Press <Enter>
Advanced Configuration Options ............... Press <Enter>
<F6> - Reset to Host Adapter Defaults
) and Enter keys to select the SCSI ID, if you need to change it.
SCSISelect (TM)
0
1
2
3
4
5
6
7
*
8
9
10
11
12
13
14
15
Chapter 4 – SCSISelect Configuration Utility 4-7
Utility
=default)
*
Advertisement
Table of Contents
