Table of Contents
Advertisement
To remove a hot-swappable redundant power supply:
1.
Turn the thumbscrew counter-clockwise to loosen the power supply.
2.
Push the metal lock towards the center as shown below and gently pull the
power supply out using the metal handle.
Metal Lock
1-22
Altos 1100E Series User's Guide
The power supply subsystem should supply a
minimum of 337-watts to the whole system. If
you only have one power supply or if you
have two power supplies and are planning to
remove both of them, remember to turn off
the power first and disconnect the power cord
from the electrical outlet.
Advertisement
Table of Contents
