Cleaning The Optical System - GLP YPOC 575 Instruction Manual

Attention:
1. Never let optical parts come into contact with oil or fat.
2. Before running the fixture wait until all parts are dried up.
3. Never clean the aspheric lens with water or other cleaners. Change the
lens if it looks milky (about 1-2 years). For that please contact your local
dealer.

7.3 Cleaning the Optical System

1. Pull out the main plug!
2. Wait min. 20 minutes after the last operation to cool down the fixture.
3. Open the upper shell of the head casing by loosening the 4 Phillips screws.
Two on the front side and 2 on the back side of the head.
4. Do the work as explained in the list above.
5. Before you put the
retina can be hurt!
GLP German Light Production
Y P O C 5 7 5 into operation close the casing, otherwise your
Y P O C 5 7 5
(V1.25)
25