Table of Contents
Advertisement
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Don't touch the bulb of the lamp with bare fingers (this can cause damages).
• Before you put the
retina can be hurt!
5.2 Realize the Lamp Change
1. Pull out the main plug!
2. The lamp can be changed in a very comfortable way directly from the backside
of the case without opening the head.
3. Open the four screws (1,2,3 and 4) of the backside lamp sheet and remove it
carefully.
4. Remove the old or broken lamp by opening the two sidewise lamp screws.
Attention: The glass bulb of the lamp can splinter. For that reason remove the
lamp with safety gloves or some cloth.
5. Put in the new lamp securely with a tight fit into the socket and close the two
lamp screws. The lamp filler neck must not in the direction lamp or lenses.
Attention: Use only the original lamp type!
6. Pull the lamp holder safely back in the shaft and close the four screws.
7. The running time of the lamp
GLP
German Light Production
Y
P
O
C
5
7
5 into operation close the casing, otherwise your
Y
P
O
C
5
7
5
LA1
can be reseed in the
(V1.25)
Time
Menu.
22
Hide quick links:
Advertisement
Table of Contents
