Advertisement
3
3
Make preparations for cutting
3
Perform Auto Registration
Mark Reading
Click
Click the [Cut...] button. The registration marks are
read automatically. Do not touch the printed sheet
during the reading operation, as this will affect the
accuracy.
If a "Registration Mark Reading Failure"
error message is displayed, please refer
to the Craft ROBO User's Manual
HINT
(CD-ROM).
4
4
Perform Cutting
1
Perform cutting
Click the [OK] button to start cutting.
Do not touch the Craft ROBO during the cutting
operation.
When cutting has been completed, remove the
sheet. Turn the feed knob to remove it.
Let's try out the Craft ROBO
2
2
Finished!
[OK] button
The pop-up card is complete when you assemble it.
9
Advertisement
