Smartnode 5570 Overview; Smartnode 5570 (Front) - Patton SmartNode 5570 User Manual

Enterprise session border router
Hide thumbs Also See for SmartNode 5570:
Table of Contents

Advertisement

SmartNode 5570 User Manual

SmartNode 5570 Overview

The SmartNode 5570 Enterprise Session Border Router (ESBR) (see
tures such as SIP TLS, SRTP, stateful firewall, and secure provisioning to protect the LAN networks from fraud
strikes out of the Internet. For survivability use cases the PRI (E1/T1) ports can be used for local PSTN break-
out. The PRI ports can be used to connect legacy equipment to any VOIP network as well. Like any other
Trinity device, the 5570 comes with the built in WEB Wizard for ease of use.
The SmartNode 5570 series consists of several models: see the complete SKU list on the corresponding product
page on www.patton.com.
All the SN5570 models come equipped with two 10/100/1000 Base-T Ethernet ports and with either 1or 2
PRI (E1/T1) ports.
The SmartNode 5570 ESBR performs the following major functions:
30 channels of Voice over IP and local voice switching via 1 or 2 ISDN PRI E1/T1 ports. Each port can be
switched between NT and TE per software. However the port pin-out stays always the same. Also consider
the different pinout for port 0/1. Either port can be used as a clock source. Selected models have a Stratum
3 CO quality clock (HP) for installs where no external clock source is available.
Depending on the model, a fallback cut-through relay between ISDN PRI ports 0/0 and 0/1 electrically
connects the NT and TE port in case of power failure and enables life-line calls to the public ISDN network
(PSTN-supplied ISDN line must be used).
Standard compliant VoIP in accordance with SIPv2 protocol.
Supports 15 SIP to SIP calls and can be license upgraded to a total of 512* (additional cost)
Internet access and IP Routing with IP Quality of Service (QoS) support for mixed voice and data traffic.
SIP registrar, SIP TLS, and SRTP are available on all SN5570 models.
USB 2.0 host port for 3G/4G modem support, which can be used for Survivability applications as a data
backup link.
-
A list of supported USB Models can be found in the release notes and in the Trinity Release 3.5.x- Com-
mand Line Reference Guide.
-*Supported under ideal conditions. Transcoding, debugging, and/or IP routing reduce processing capacity.

SmartNode 5570 Overview

Figure 1. SmartNode 5570 (Front)
1 • General Information
figure
1) comes with built-in security fea-
15

Advertisement

Table of Contents
loading

Table of Contents