SmartNode 5300 Enterprise Session Border Router, Quick Start Guide Important—This is a Class A device and is not intended nor approved for use in an industrial or residential environment. Sales Office: +1 (301) 975-1000 Part Number: 07MSN5300-QS, Rev. A Technical Support: +1 (301) 975-1007 Revised: May 21, 2014 E-mail: support@patton.com...
Page 2
• This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified ser- vice personnel. WARNING • The external power adapter shall be a listed Limited Power Source. The mains outlet that is utilized to power the devise shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker.
Page 3
3. Verify that the AC power cord included with your router is compatible with local standards. If it is not, con- • tact Patton to replace it with a compatible power cord. 4. Connect the male end of the power cord to an appropriate power outlet.
Page 4
Connecting SmartNode to Laptop via console access Configuration settings: 19200 bps • 8 bits, no parity • 1 stop bit • flow control off • “Console Port” See section on page 35 for console port pin-outs. Note SmartNode 5300 Quick Start Guide...
Page 5
Toll-Free VoIP support: call with a VoIP SIP phone www.patton.com Online support: E-mail support: support@patton.com—answered within 1 business day Telephone support: Standard:1(301)975-1007(USA), Monday–Friday: 8:00 am to 5:00 pm EST(1300 to 2200 UTC/GMT) • Alternate:+41(0)31 985 25 55 (Switzerland), Monday–Friday 9:00 am to 5:00 pm CET(08:00 to16:30 UTC/ •...
E TEC Declaration of Conformity Patton Electronics, Inc declares that this device is in compliance with the essential requirements and other rele- vant provisions of Directive 2004/108/EC relating to electromagnetic compatibility, Directive 2006/95/EC relating to electrical equipment designed for use within certain voltage limits and Directive 2011/65/EC relating to RoHS compliance.
Need help?
Do you have a question about the SmartNode 5300 and is the answer not in the manual?
Questions and answers