Numeric Entry Method - Adam Equipment NBL 84 e/i Operating Manual

EN

8.1 NUMERIC ENTRY METHOD

To set a value when required, use the keys as given below:-
[Up] and [Down] symbol keys start entry process, causing the active digit to flash.
Press [Up] and [Down] to increase or decrease the flashing digit.
Once each digit is set to the required value, use the [Left] and [Right] symbol keys to
advance or move back through the digits and then press [Up] and [Down] to increase or
decrease the flashing digit as required.
Once the value displayed on screen is as required, press the [Setup] key to accept or
enter the displayed value.
Press the [ 0/T] key to exit the menu at any time.
© Adam Equipment Company 2015
[Down] To decrement or change a displayed value or scroll
through options backwards
[Right] To advance a flashing digit by one position to the
right.
To go back by one step during setup functions
[Left] To advance a flashing digit by one position to the left
[Up] To increase or change a displayed value or scroll
through options forward
16
3016612481Rev2.00-Jul15