Setup Parameters - Adam Equipment NBL 84 e/i Operating Manual

EN
Select a code for one of the pre-set data formats as detailed above.
The next line shows: "LINE 02
Only one item can be entered per line.
Continue until the formatting of the form is complete. There are 15 lines of possible data.
After the 15th line has been set or "END
"SERIAL SERIAL SERIAL SERIAL" Sub-menu.
Press [Mode] to advance to setting of the next menu, or press [
normal weighing.

13.5 SETUP PARAMETERS

The user parameters that control the balance are shown under the setup menu. When
"SE SEtV SE SE tV tV tVP P P P " is displayed, press the [Setup] key. The options for each parameter can be
scrolled through by using the [Up] or [Down] key. Use the [Up] and [Down] keys to
increase or decrease the value for setting. Press [Setup] to accept the setting and
advance to the next item in the menu
Press [Mode] to advance to setting of the next parameter or [
weighing
Select menu language from available options.
LANGV LANGVAGE LANGV LANGV AGE AGE AGE
Set real-time clock using the keypad numeric entry method. HH:MM:SS.
TIME TIME TIME TIME
DATE FORM Set date display format using the keypad numeric entry method. European
DATE FORM
DATE FORM DATE FORM
(DD/MM/YY) or USA format (MM/DD/YY).
Set date using the keypad numeric entry method. YEAR, MONTH, DAY,
DATE DATE DATE DATE
WEEKDAY
Enter a user number to identify this balance on print output. Range 1 -
INST ID INST ID INST ID INST ID
9999999
On = Enable sound alerts
BVZZER BV ZZER
BV BV ZZER ZZER
OFF = Disable sound alerts
AUTO = Always on unless balance is not used for 5 minutes, then turns off
BACKLIT BAC KLIT
BAC BAC KLIT KLIT
automatically until key is pressed or weight >20d is detected.
ON
OFF = Permanently off
On = Power-saving mode enabled . Sets the inactivity period after which unit
POWER POWER POWER POWER
will go into stand-by mode. Range 1 – 9 minutes.
OFF = Power-saving mode disabled.
The filter tracks and averages weighing to produce the most accurate
FILTER FILTER
FILTER FILTER
measurement and smooth out instabilities. A higher filter number means more
filtering and a slower, but possibly more stable and accurate response. A
lower number will produce a quicker measurement but it may be less stable
and accurate. Range 1 (low) to 9 (high).
Recommended value for normal use: 5
ON = A fine filter which provides better performance when weighing whilst
FILLING FILLING
FILLING FILLING
pouring a substance such as liquid or powder into a container on the pan.
OFF = No filtering. Recommended setting for normal use.
Set a value to be used to determine balance stability. The number
STABILI STABILI STABILI STABILI
corresponds to the number of divisions the weight reading is fluctuating by. A
© Adam Equipment Company 2015
LINE 02" "TIME TIME" - prints time.
LINE 02 LINE 02 TIME TIME
END" has been selected, the balance will return to the END END
= Permanently on
0/T] to return to
0/T] to return to normal
34
3016612481Rev2.00-Jul15