Launch Keyboard Macro; Set Mouse Mode - Raritan Dominion KX III Administrator's Manual

Chapter 10: Mobile KVM Client (MKC) Help

Launch Keyboard Macro

Set Mouse Mode

372
Pre-defined macros are always available in MKC. You must import
user-defined macros using the desktop Access Client before they are
available on MKC. See
page 371).
SUN macros are available in MKC if you are connected to a target that
has the SUN CIM.
To launch keyboard macro:
1. In the MKC toolbar, touch Menu, then touch Keyboard Macros.
2. Touch the macro you want to launch.
The macro is launched and the results display on the target.
When controlling a target server, the MKC displays two mouse cursors: a
red bullseye indicates where the mobile touch gestures are relative to
the target, and the cursor that belongs to the target server.
Single mouse mode is not available in MKC.
Your mouse will operate in dual mouse mode only. When properly
configured, the two mouse cursors align.
There are several mouse modes when in dual mouse mode. Mouse
modes are available based on the attached CIM and selected USB profile.
Absolute Mouse Mode
See
•
Intelligent Mouse Mode
• See
Standard Mouse Mode
See
•
To set mouse mode:
1. In the MKC toolbar, touch Menu, then touch Mouse.
2. Touch Mouse Mode, then touch Absolute, Intelligent, or Standard.
Manage Mobile Client Keyboard Macros
(on page 373).
(on page 373).
(on page 373).
(on