Configure Serial Port Keyword List; Upgrade Dsam Firmware - Raritan Dominion KX III Administrator's Manual

Chapter 7: Serial Access With Dominion Serial Access Module

Configure Serial Port Keyword List

Upgrade DSAM Firmware

344
Port keywords work as a filter. You can create port keywords and
associate them with -
• Events
Local/remote syslog messages
•
SNMP traps
•
If a keyword is detected -
• A corresponding message is logged in a local/NFS port log.
A corresponding event is sent via SMTP (if configured).
•
A corresponding trap is sent via SNMP (if configured).
•
This feature is useful for notifying administrators if a particular event
occurs on a port. Using port keywords to report events does not impact
the NFS log size.
For keywords to trigger when no users are connected to a port, "Always
Active" must be selected on the port's Port Configuration page.
A list of existing port keywords is displayed on the Port Configuration
page as well.
To configure serial port keywords:
1. Choose Device Settings > Serial Port Keywords. The Serial Port
Keyword List page opens.
2. Click Add at the bottom of list on the page. The Keyword page opens.
3. Type a keyword in the Keyword field.
4. Select the Port(s) you want to associate with that keyword.
5. Click Add to add them to the Selected box.
6. Click OK.
DSAM firmware is upgraded automatically during KX III device firmware
upgrades if a new DSAM version is detected in the device firmware. You
can also upgrade your DSAM firmware manually.
To upgrade the DSAM firmware manually:
1. Choose Maintenance > DSAM Firmware Upgrade.