Manage Mobile Client Keyboard Macros; Launch Keyboard Macro; Set Mouse Mode - Raritan Dominion KX III Administrator's Manual

Chapter 7: Mobile KVM Client (MKC) Help

Manage Mobile Client Keyboard Macros

Launch Keyboard Macro

Set Mouse Mode

304
Each user must import their user-defined keyboard macros to make them
available for use while connected to targets using the Mobile KVM Client
(MKC).
Export the file from Virtual KVM Client (VKC), then import it using the
desktop Access Client. You cannot import macros using a mobile device.
Imported macros are available per user in MKC when you connect to a
target using your mobile device.
Pre-defined macros are always available in MKC. You must import user-
defined macros using the desktop Access Client before they are
available on MKC. See
page 304).
SUN macros are available in MKC if you are connected to a target that
has the SUN CIM.
To launch keyboard macro:
1. In the MKC toolbar, touch Menu, then touch Keyboard Macros.
2. Touch the macro you want to launch.
The macro is launched and the results display on the target.
When controlling a target server, the MKC displays two mouse cursors: a
red bullseye indicates where the mobile touch gestures are relative to the
target, and the cursor that belongs to the target server.
Single mouse mode is not available in MKC.
Your mouse will operate in dual mouse mode only. When properly
configured, the two mouse cursors align.
There are several mouse modes when in dual mouse mode. Mouse
modes are available based on the attached CIM and selected USB
profile.

See Absolute Mouse Mode

See Intelligent Mouse Mode

See Standard Mouse Mode
To set mouse mode:
1. In the MKC toolbar, touch Menu, then touch Mouse.
Manage Mobile Client Keyboard Macros
(on page 305).
(on page 305).
(on page 305).
(on