Setting Up - BT PaperJet 300 User Manual

Setting up

1 Plan the location of your
PaperJet 300
Place your PaperJet 300 on a stable, flat surface.
Make sure it is close enough to the telephone and
mains power sockets so that cables will reach.
Remember to leave enough room at the front of the
machine for documents to come out. Allow a free
flow of air around the machine for ventilation.
2 Fit the plain paper tray into the two
slots on the PaperJet 300
10
PaperJet 300 user guide ~ Edition 3.2 ~ 25th july '01 ~ 3693
3 Connect the handset
Handset connection
Plug the handset cord into the socket marked
HANDSET at the side of the machine. Place the handset
in the cradle.
4 Connect the telephone line cord
Plug the telephone line cord into the socket marked
LINE at the back of the machine. Connect the other
end to the telephone wall socket.