Setting Up - BT VERVE 3000 EXECUTIVE User Manual

Verve 3000 user guide ~ 3.1 Edition ~ 14th October '02 ~ 4805

Setting up

Plan the location
Situate your product close enough
to the mains power socket so that
the cables will reach.
Make sure that it is at least 1
metre away from other electrical
products to avoid interference.
Do not situate the product in the
bathroom or other humid areas.
Connect the charger
1
Plug the power supply cable into
the power socket on the underside
of the charger.
The Power/In use light will be lit
when power has been connected
correctly. (N.B. The Verve 3000
power supply cable connector is
red.)
Plug the power supply
2
unit into the wall socket
Insert the batteries
3
Insert the three AAA rechargeable
batteries supplied, as indicated
inside the battery compartment
and slide the battery compartment
cover shut.
9