Page 1
Follow the steps in this guide to set up your kit. If you need some help, see the Frequently Asked Questions at bt.com/producthelp or call 0808 100 6116*. * Calls made from within the UK mainland network are free. Mobile and International call costs may vary.
Page 2
Insert the CD See ‘Connection help’ if you don’t have a CD drive on your computer. IMPORTANT: Do NOT plug the dongle in until you’ve installed the drivers from the CD. 1. Insert the CD into your CD-ROM drive and click Run Setup.exe to begin install drivers. 2.
Connect to wi-fi If your device already has built-in wireless, you should switch it off. Using your network security key 1. Click in your system tray (lower-right corner of your screen) to view available wireless connections and find the dongle connection. You might need to scroll down.
If the driver BT Wi-Fi Dongle is displayed with “!”, “?”, “X” symbols, the driver installation has failed. In this case, you’ll need to update or reinstall the driver again. Right-click on BT Wi-Fi Dongle, and then click Update Driver and follow the instructions on the screen.