Delayed Faxing - BT PaperJet 300 User Manual

Delayed faxing

Store a document of up to 20 standard pages in the
memory for sending at a specific time within the
next 24 hours. This lets you take advantage of lower
call rates or coincide with time zone differences if
sending to another country.
To send a delayed fax
Load the document face down.
Set the resolution and contrast if required.
Press Function until the display shows
3: TIMED SEND?
Press Enter. Display shows
Enter the time you want the fax to be sent
KEYPAD
using the 24 hour clock, e.g. to start sending
at 7.30pm, enter 19 30.
Press Enter.
Display shows
KEYPAD Enter the fax number. You can also use
One Touch memory buttons and Directory
entries.
Press Enter. The document is scanned.
Display then shows
time you have set.
If you have set the resolution to Photo and the
scanning memory becomes full, try resetting with
the resolution set to Standard, Fine or Superfine.
26
PaperJet 300 user guide ~ Edition 3.2 ~ 25th july '01 ~ 3693
START TIME:
ENTER FAX NUMBER?
TIMED SND and the
NOTE
To cancel a delayed fax
Press Function until the display shows
3: TIMED SEND?
Press Enter. Display shows
Press Enter to confirm. You hear a
confirmation beep.
Display shows
CANCELLED!
To change the time and/or number of
a delayed fax
Press Function until the display shows
3: TIMED SEND?
Press Enter. Display shows
Press Function until the display shows
CHANGE?
Press Enter. Display shows
and the time currently set.
KEYPAD Enter the new time.
Press Enter.
Display shows the fax destination.
Press Delete to delete the number.
8 0
DELETE
Enter the correct number. You can also use
KEYPAD
One Touch buttons or a Directory entry.
Press Enter to confirm. You hear a
confirmation beep.
Display shows TIMED SND and the
time set.
CANCEL?
CANCEL?
START TIME