Table of Contents
Advertisement
Setting up
Plan the location
Situate your Converse 2015 close enough to a
phone socket so that the line cord will reach.
Your Converse 2015 can be wall-mounted. See
'Wall-mounting', on page 22.
1
Connect the handset
Plug one end of the coiled cord into the handset
and the other end into the socket on the left
side of the base
Place the handset on the hook.
All manuals and user guides at all-guides.com
Converse 2015 ~ 4th Edition ~ 10th September '02 ~ 4517
2
Plug your Converse 2015 into the
telephone sockets
3
Set the Line1/Line 2 switch
If connecting one telephone line cord:
Set the switch to Line 1. (Make sure the
telephone cord is plugged into the Line 1
socket). This line is used for all calls including
data communications and the data port is
automatically linked to Line 1.
Note
When using the data port with only one line
connected, the line will be in use so you will
not be able to make or receive voice calls.
7
Advertisement
Table of Contents
