Basic Operation; Temperature Adjustment - Ice & Water Models; Temperature Adjustment - Non-Ice & Water Models - Fisher & Paykel 635 Active Smart Service Manual

321144
4.23

Basic Operation

4.23.1 Temperature Adjustment – Ice & Water Models
To adjust Compartment Temperatures:
1. Use the MENU button to scroll to the TEMPERATURE screen on the LCD display.
2. Use the MENU button to select the compartment to change.
3. Use the UP or DOWN arrows to adjust the temperature. The temperature setting will be indicated on
the icon below.
4.23.2 Temperature Adjustment – Non-Ice & Water Models
To adjust Compartment Temperatures:
1. Press the MODE button.
The provision compartment light on the refrigerator diagram will flash on and off. The temperature
indicator illustrated by a thermometer will show the temperature setting for this compartment.
2. The temperature can be altered by pressing the TEMPERATURE UP or TEMPERATURE DOWN
buttons. Fewer LED lights on the thermometer means a cooler temperature.
3. To adjust the freezer temperature press the MODE button again. The freezer temperature light will
flash on the refrigerator diagram.
4. The freezer temperature can be altered by pressing the appropriate TEMPERATURE UP or
TEMPERATURE DOWN buttons.
Successively pressing the MODE button will automatically select between the compartments. A return to the
provision compartment will be accompanied by a longer beep.
Temperatures shown are average temperatures. One degree C incremental temperature adjustment is
indicated by the "half" lights that illuminate as the temperature up / down button is pressed.
Diagram 4.23.1
LEDs INDICATE APPROXIMATE TEMPERATURE
P C
+ 10
+ 8
+ 6
+ 4
+ 2
0
Diagram 4.23.2
FC
-12.5
-14.0
-15.5
-17.0
-18.5
-20.0
36