Divider Partition - Fisher & Paykel 635 Active Smart Service Manual

321144
4.15

Divider Partition

This is moulded in two outer pieces and has an inner polystyrene moulded duct assembly that is wax coated.
This provides a barrier between the FC and PC compartments, also allowing return air from the PC to move
back to the FC evaporator in 'T' models. In both models it houses the PC fan motor. In 'B' models it houses
also the low ambient heater. The divider is fitted into the cabinet as an assembly and cannot be replaced.
"B" DIVIDER PARTITION
Diagram 4.15A
"T" DIVIDER PARTITION
Diagram 4.15B
30