Ac Safety Guidelines; Maintenance Safety - Hyundai HHC4GAC User Manual

1.1 - GENERAL OPERATION SAFETY
1. Always perform a pre-operation check before using the air compres-
sor.
2. Operators of the unit should always be wearing appropriate approved
eye and hearing protection. Under some conditions, long durations of
use may contribute to hearing loss.
3. Always operate the air compressor according to the instructions for
safe and dependable service.
4. Always clean and properly maintain the equipment after use.
5. To avoid harm, never operate the compressor in an enclosed area.
6. Pay attention to all warning labels and be careful not to touch the
marked parts of the compressor during and immediately after opera-
tion because they may cause burns.

1.2 - AC SAFETY GUIDELINES

Before connecting the compressor to an electrical device or power cord:
1. Make sure that all parts are in right working order. Faulty devices or
power cords can lead to an electrical shock.
2. Turn off the air compressor immediately if the device begins to operate
abnormally. Then disconnect the device and investigate the problem.

1.3 - MAINTENANCE SAFETY

1. Turn off the air compressor before performing any maintenance. Oth-
erwise, it can cause severe personal injury and/or death.
2. Allow the air compressor to cool down before performing any main-
tenance.
3. Only qualified, licensed, and/or certified maintenance personnel with
knowledge of fuels, electricity, and machinery hazards should perform
maintenance procedures.
1.4 - AIR TANK SAFETY
1. Drain the tank daily or after each use. Make sure to properly drain
condensed water from the tank in order to prevent rust and/or thinning
of the steel tank.
2. If the tank develops a leak, replace it immediately with a new tank or
new compressor outfit.
3. Do not attempt to modify or repair the compressor tank. Never drill,
weld, or make any modifications of any kind to the tank or its attach-
ments.
4. Do not attempt to modify the pressure switch, safety valve, or any
other components that control tank pressure. The tank is designed to
HHC4G User Manual
5