Add Silicone - Taurus T10.3 Pro Owner's Manual

3.3. ADD SILICONE

Time of add SILICONE

When suggested time of adding SILICONE is achieved, please extend your hand to the
center of the running board to make sure whether there is any SILICONE before adding. If
no SILICONE on the running board, please add 30cc SILICONE to the running board. If
there is still a little SILICONE, add 15cc SILICONE to the running board.
 Area of adding SILICONE
Add SILICONE from the center of the running board to the running belt 's the left and right
side which should minus 6 cm.
2014/1/24 V1.0+ T1BT V1.3+BT APP V1.1
10